If you are currently working as a team leader or supervisor, or you would like to step up to this role in an open cut quarrying or mining operation, this course will give you the necessary training you will need to be competent and effective in the role.

This course reflects the role of employees such as a supervisor or team leader working in an open cut mine or quarry. You will perform tasks involving a broad range of varied activities most of which are complex and non-routine. You will be responsible for the quantity and quality of the output of others, contribute to the development of technical solutions to non-routine problems and apply safety management plans to the workplace.

Box Hill Institute has been training people in the Extractives Industry for over 40 years. The course is developed in collaboration with industry and is supported by both the Construction Materials Processing Asssociation (CMPA) and the Institute of Quarrying Australia (IQA). The training delivery takes place primarily at the Box Hill Campus in three day blocks and includes some site visits. Course content covers environmental management, community engagement, pit planning, slope stability, risk management and quality. The course includes a high degree of collaboration amongst students and people who have completed this course recognise the value of networking with other industry professionals to develop models of best practice.

Course content covers: 

  • environmental management,
  • community engagement,
  • pit planning,
  • slope stability,
  • risk management,
  • quality.

Box Hill Institute offers flexible rolling enrolments whereby a participant can enrol in the course throughout the year and complete the training in the corresponding month of the following year.




National Code RII40115
Study Areas Quarrying & Extractive Industries
Study Level Certificate IV
Study Type Local
Study Mode

PT: 10 months

Course Type Victorian TAFE Course
Campuses Workplace

Tuition Fee Type Estimated Fee
Gov. Subsidised - Standard $2,835.00
Gov. Subsidised - Concession $567.00
Full Fee $11,340.00
Service Fees Estimated Annual Fees
Service & Amenities* $155.00
Core Skills Support** $75.00
Annual Material Fees $253.50
Retain Course Items*** No fee applies


* Does not apply to VETiS or Short course students.

** Does not apply to VETiS, International students, Short Courses, Graduate Degrees , or re-enrolling students who re-enrol in the same course.

***Retained Course Items are purchased by the student once prior to commencing. The course items bought by the student become the property of the student. Such items retain a generic application for other purposes outside the student's course of study (e.g. textbooks).

Annual student tuition & material fees as published are subject to change given individual circumstances at enrolment. Fees listed are for 2019 and may increase annually over the duration of delivery. Advertised start dates and delivery locations are subject to viable student numbers. For more information please contact our Course Advisors on 1300 BOX HILL.

Government Subsidised Place

This training is provided to eligible individuals with funds made available by the Commonwealth and Victorian Governments

February

Box Hill Institute also offers flexible rolling enrolments whereby a participant can enrol in the course throughout the year and complete the training in the corresponding month of the following year.

Intake 1: February to October, or

Intake 2: July to May (8 x 3 day blocks)

Site visits are included.

Interstate participants are welcome. Accommodation is available  close to the campus.

 

Workplace

You must be employed in the extractive industries sector.

You may wish to progress onto the Diploma of Extractive Operations Management.

Direct entry- contact Diane Wilson Project Manager on  9286 9711 Mobile:0434 666 805

dianewilson@boxhill.edu.au

Recognition of Prior Learning is available.

This course is government accredited and has national recognition

The qualification is aligned with the Australian Qualification Framework (AQF) level 4

This course will allow you to fulfil the role of a Team Leader or Supervisor. It is considered to be the first step in your management development toward becoming a quarry manager.

Test content

Code

Title

Hours

BSBFIA402 REPORT ON FINANCIAL ACTIVITY 30.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

BSBMGT402 IMPLEMENT OPERATIONAL PLAN 40.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

RIICOM301D COMMUNICATE INFORMATION 30.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

RIICOM301D COMMUNICATE INFORMATION 30.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

RIIGOV401D APPLY, MONITOR AND REPORT ON COMPLIANCE SYSTEMS 80.0

This unit describes a participant’s skills and knowledge required to apply, monitor and report on compliance systems in the Resources and Infrastructure Industries.

This unit is appropriate for those working in a supervisory role where compliance needs to be managed.

Prerequisites:
Assessment:

RIIRIS401D APPLY SITE RISK MANAGEMENT SYSTEM 40.0

This unit describes a participant’s skills and knowledge required to apply the site risk management system in the Resources and Infrastructure Industries.

This unit is appropriate for those working in supervisory roles.

Prerequisites:
Assessment:

BSBSUS301 IMPLEMENT AND MONITOR ENVIRONMENTALLY SUSTAINABLE WORK PRACTICES 40.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

BSBWHS401 IMPLEMENT AND MONITOR WHS POLICIES, PROCEDURES AND PROGRAMS TO MEET LEGISLATIVE REQUIREMENTS 50.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

RIIPRO401D SUPERVISE PROCESSING OPERATIONS 60.0

This unit develops a participant’s skills and knowledge required to supervise processing operations in Coal and Metalliferous mining.

This unit is appropriate for those working in supervisory roles

Prerequisites:
Assessment:

RIIMEX404D APPLY AND MONITOR SYSTEMS FOR STABLE MINING 80.0

This unit describes a participant’s skills and knowledge required to apply and monitor systems for stable mining in Metalliferous mining.

This unit is appropriate for those working in supervisory roles.

Prerequisites:
Assessment:

RIIBLA401D MANAGE BLASTING OPERATIONS 40.0

This unit describes a participant’s skills and knowledge required to manage blasting operations in the Resources and Infrastructure Industries.

This unit is appropriate for those working in supervisory roles.

Prerequisites:
Assessment:

RIIWMG401D APPLY AND MONITOR THE SITE WATER MANAGEMENT PLAN 60.0

This unit develops a participant’s skills and knowledge required to apply and monitor the site water management plan in Coal mining and Extractive.

This unit is appropriate for those working in supervisory or technical specialist roles.

Prerequisites:
Assessment:

RIIMPO401D SUPERVISE MOBILE PLANT OPERATIONS 40.0

This unit describes a participant’s skills and knowledge required to supervise mobile plant operations in Coal and Metalliferous mining, Extractive and Civil construction.

This unit is appropriate for those working in supervisory roles.

Prerequisites:
Assessment:

RIIMEX401D APPLY PIT PLAN 190.0

This unit describes a participant’s skills and knowledge required to apply a pit plan in Coal and Metalliferous mining and Extractive.

This unit is appropriate for those working in supervisory roles.

Prerequisites:
Assessment:

RIIERR302D RESPOND TO LOCAL EMERGENCIES AND INCIDENTS 20.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

RIIMPO403D MONITOR INTERACTION OF HEAVY AND LIGHT VEHICLES AND MINING EQUIPMENT 60.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

RIIQUA401D APPLY A QUALITY MANAGEMENT SYSTEM ON SITE 60.0

This unit describes a participant’s skills and knowledge required to Apply a quality management system on site in the Resources and Infrastructure Industry.

This unit is appropriate for those working in supervisory and technical specialist roles.

Prerequisites:
Assessment:

RIIENV401D SUPERVISE DUST AND NOISE CONTROL 40.0

This unit describes a participant’s skills and knowledge required to supervise dust and noise control in Coal and Metalliferous mining and Extractive.

This unit is appropriate for those working in supervisory and technical specialist roles.

Prerequisites:
Assessment:

BSBFIA402 REPORT ON FINANCIAL ACTIVITY 30.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

BSBMGT402 IMPLEMENT OPERATIONAL PLAN 40.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

BSBWOR404 DEVELOP WORK PRIORITIES 40.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

BSBLED401 DEVELOP TEAMS AND INDIVIDUALS 40.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

BSBMGT403 IMPLEMENT CONTINUOUS IMPROVEMENT 40.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:

BSBPMG522 UNDERTAKE PROJECT WORK 60.0

There is currently no description entered for this unit.
Prerequisites:
Assessment:


Last updated: December 13, 2018 09:14am